120 Volt Switch Mat
with Built in Relay - No Wiring Necessary
This highly durable 14 inch by 14 inch mat is designed with plug and relay already installed. Plug into any normal 120V wall outlet, then plug any item, up to 100 watts into the 120V plug coming from the unit (on a 6 foot cord). Anyone who steps on it will immediately activate a buzzer, strobe light, lamp, recording device and more. Device automatically turns off when weight is lifted off of pad. The base is a hard plastic flanged bottom, and is built to be sunk into a carpet or flooring area. Simply cut out 14 inch by 14 inch hole in carpet or wood frame, and set mat down into recessed area. Features press-at-any-point actuation. Perfect for haunted houses, alarm systems or safety areas!
Buy Factory Direct and Save $$$:
ON SALE Item# 100WSM Regular: $199 Only $49
Two easy steps:
Plug desired effect(s) into 120 volt cable coming from switch mat. Shown here with strobe light for example.
Plug switch mat into any standard wall outlet (120 volt).
Strobe light or other plugged in effects will turn on when slight pressure is applied anywhere on mat!
This highly durable mat is designed as a low voltage switch. Whenever someone steps on it, it closes the low voltage contacts, when they step off, it releases again. Can be used to close the connection on a relay for operation of any 120 Volt device (such as a light or artificial flame), or can be used directly to trigger any low voltage device, such as a doorbell. Relay is not included. Base is 6" x 23". Weight: 3 lbs.
Item# VA495 Only $199
Industrial Switch Mat
These low voltage mats are designed for personnel sensing around dangerous machinery and in hazardous locations. They are highly sensitive and feature press-at-any-point actuation.
Field tested for more than twenty-five years, the Controlmat surface is both moisture and abrasion resistant. Ribbing on the top and bottom surfaces prevents water or oil buildup. The fully-protected switching elements are extremely rugged and reliable, and provide an operating life of several million cycles.
Controlmat sensing mats are easy to install and require no special floor preparation or add-on metal edges. All mats are supplied with 4-lead fail-safe wiring.
Features & Benefits
- Moisture, chemical, and abrasion resistant for long life in haunted house settings
- Easy installation – no special floor preparation or add-on metal edging required
- Switching elements rated for several million cycles to ensure long life
- 4-lead fail-safe wiring is standard
Actuation Force . . . . . . . . . . . . . . . . . . . . . 22 lbs (100 N) nominal
Recommended Voltage & Current . . . . . . 24 Vac or Vdc at 1.0 amps max.
Environment . . . . . . . . . . . . . . . . . . . . . . . . IP65 rated, 0 to 122 °F (-18 to 50 °C)
24 inches x 36 inches
Item# 55105 Only $399