Thank you for purchasing the Helicopter™ Light from StarLight.com™

This unit comes complete with bulbs and color lenses. Make sure the unit is not plugged in. Unscrew the cover and look for the two wires coming out of the socket. These will supply power to your bulb.

Attach the two wires to the two screws on the back of the bulb. Polarity does not matter - either wire can go to each screw. You can use a flat head screwdriver or a phillips screwdriver. Do not over tighten, as this may break the tab off the rear of the bulb.

Place the bulb into the socket. The socket can be turned to face any direction.

Place the lens on top of the bulb as shown. Extra lenses may be purchased from us so that colors may be changed.

Replace the lens cover by gently turning clockwise. If you encounter resistance, back cover off and try again. Forcing the cover again can strip the threads.

This unit, like all of our effect lights, plugs into a standard 110 volt wall outlet.

www.StarLight.com